Affiliate Login

Motion Terminal
Resources
Blog
Forum
B2B
About
Shop

Select Page

Remember Me

Order SOLO today!

You are just a few clicks away from ordering your SOLO Motor Controller Unit.
Orders will be shipped worldwide via express courier, within 7 working days or Less.

ORDER NOW

Subscribe For SOLO Updates

Success!

Email

Subscribe

Latest News

Simulink Library News

Dear SOLO Community, shortly, we will release a powerful Simulink Mathwork library supporting all the functionalities of SOLO offered by USB and UART communications, in near future the CANopen support using KVASER modules will be added to this library too. The library...

New update: SOLO Arduino Library v3

Dear SOLO community, We are excited to announce that the CANopen library is finally released for Arduino devices! We believe this will help all of our users to take advantage of a very robust and high-performance data-transfer protocol within their projects in the...

CANopen library for Arduino is comming soon!

Dear SOLO community, We’ve been working on a new and powerful library to make the Arduino modules capable of communicating with SOLO products through CAN bus using CANopen software layer, This library will cover all the commands existing in the object dictionary of...

Python Library – SoloPy v2 Released

Dear SOLO community, We are happy to announce that a new release of our Python Library, known as SoloPy is out!The new version has several improvements in terms of performance and user interface as well as code readability! The new version is similar to the previous...

New Firmware with CANopen feature is released!

Dear SOLO community, As promised, the latest firmware “0x0000B009” with CANopen interface is released, after this you can utilize your SOLO units in CANopen networks and to know more about CANopen you can refer to our CANopen user manual. Besides the following...

CAN Open is coming soon!

Dear SOLO community, We are currently working on activation of CANopen on SOLO UNO and SOLO MINI units, at this stage we are preparing a new firmware release called V009 and it will have CANopen with some new features activated! Once the Firmware goes...

Windows .Net DLL for SOLO’s Digital Control is out

Windows .Net DLL for SOLO’s Digital Control is out! It will make the use of SOLO in third party software like Matlab, Matlab-Simulink and Labview far easier and more accessible, it can be also used in all the .NET enabled programming languages, such as C#, F#, VB...

SOLO Mini passed the tests

SOLO MINI, just passed all the functional and thermal tests, and it's ready for production. It has significantly smaller dimensions compared to SOLO UNO and it offers all the features of SOLO UNO in a more compact design

SOLO Python & Raspberry Pi Library is going forward

SOLO, getting Tested with Raspberry_Pi using our Python library with both USB and UART! We are finalizing the tests and some example codes are coming within days. The full page of the Library is here.

Firmware V007 is Released [Dual Core activated!]

Dear SOLO Community, We just published the latest firmware version V007 for SOLO with an exceptional breakthrough using Dual core parallel processing that is now activated and all of our users can enjoy the radical performance enhancement it offers! Just to have a...