IntroductionSOLO Motor Controllers products are now coming with an advanced Embedded Motion Profile Generation Engine that allows its users to simply create very smooth and low jerk Position or...
SOLO Embedded Motion Profile Engine
read more
Position Control
Our TOP Categories:
– Tutorial
– Arduino / Arduino Library
– Python / Raspberry Pi / SoloPy
– Simulink
– Motion Terminal
– Educational
– Analogue / Digital Control
– News
By Feedback Type:
– Encoder
– Hall Sensor
– Sensor-less
By Loop Type:
– Closed-Loop
– Open-Loop
CANopen Brushless Motor Position Profile Controlling with Arduino and SOLO
IntroductionIf you are making an industrial Motion system that is going to be used in harsh environments, under noisy conditions with tight safety requirements most probably your first choice of...
![Position control of a Brushless Motor with Arduino and SOLO [+ Arduino Code]](https://www.solomotorcontrollers.com/wp-content/uploads/2021/04/Thumbnail_BLDC_PMSM_Position_Control_Arduino_SOLO_Library_3-400x250.png)
Position control of a Brushless Motor with Arduino and SOLO [+ Arduino Code]
In this article we are going to control the position of a Brushless DC or Permanent Magnet Synchronous Motor using SOLO with Arduino and more specifically using SOLO’s Arduino Library , in another...
How to Connect and Calibrate Incremental Encoders with SOLO
In this article we are going to demonstrate a practical method to correctly connect and setup your quadrature Encoder to SOLO for Torque, Speed and Position controlling purposes. To this end, based...
![Raspberry Pi Brushless Motor Position Control using SOLO and Incremental Encoders [+ Code]](https://www.solomotorcontrollers.com/wp-content/uploads/2021/06/PMSM-Position-Control-With-Raspberry-Pi-and-SOLO-400x250.png)
Raspberry Pi Brushless Motor Position Control using SOLO and Incremental Encoders [+ Code]
When it comes to controlling the Position of a Brushless DC (BLDC) or a Permanent Magnet Synchronous Motor (PMSM) that are also known as BLAC using Raspberry Pi, you will need a Motor...
Position Controlling of a Brushless Motor with Incremental Encoders using SOLO in Motion Terminal
In a lot of applications it’s important to control precisely the positioning of an electrical Motor, like in lots of Robots, 3D printers, CNC machines and so on, and to make that happen there...
How to Setup and Tune your Motors using SOLO Motion Terminal Like a Champ! (Closed-loop Guide)
we all know how hard it can get, setting up a motor controller and getting it to do what you exactly want them to do! SOLO is here for the same reason and the same goal, just to make the whole thing...