Forum
Hi @Milad,
The USB port of my SOLO is shitting again. I buy a 3.3v serial module, connecting UART pins, and successfully drive the controller with MotionTerminal.
I try the upgrading. Not any error, but a (too suspicious) quick reboot, and a B014 version on MotionT that suggest me that it doesn't work.
=> Is the upgrade can be done via the serial Port ? ?
Hi @Meric,
The USB port of my SOLO is shitting again
in what sense? you mean it's not detected by the motion terminal or it has some other issues?
=> Is the upgrade can be done via the serial Port ? ?
Unfortunately not, it can be only done using a direct USB connection.
So let me know what's the exact issue and we will try to solve it.
Regards
Milad
If you found the answers helpful and you could solve your problems, please kindly verify here to help others in the future.
@milad unfortunately the same that last time : it has desoldered. ?
