FORUM
Notifications
Clear all
Topic starter
05/08/2024 11:10 am
i want to get the voltage and current of all the 3 phase(A,B,C) of an BLDC motor in a matlab simulink program , but I have only been able to find the blockset for phase A and B there is no blockset to read the current or voltage of the phase C of the motor, so please guide me that how can i read those values of phase C
05/08/2024 11:19 am
Hi @xtreme,
For the current or voltage of phase C you can do the following computation after reading the voltage and current of phase A and B within simulink:
Ic = - 1 x ( IA + IB )
Vc = -1 x ( VA + VB)
Milad
If you found the answers helpful and you could solve your problems, please kindly verify here to help others in the future.
