FORUM
Notifications
Clear all
Topic starter
10/05/2022 6:46 pm
Can SOLO be controlled with a TTL signal?
I am investigating using the following board. Please see page 9 of the attached manual.
The PWM has a frequency of 1kHz to 10kHz.
Thank you.
11/05/2022 7:27 am
@gs76 ,
According to the datasheet attached the voltage of the PWM is between 0 to 5V so it matches SOLO's input level, the frequency of 10kHz is also good for the input, so by fixing the frequency at 10kHz and changing the duty cycle from 0% to 100% you can go from 0 speed to max speed.
Regards
Milad
If you found the answers helpful and you could solve your problems, please kindly verify here to help others in the future.