SOLO ARDUINO ENVIRONMENT
a step forward in simplification
Here you can find all the resources to work easily with ARDUINO and SOLO.
Arduino has an amazing comminity and popularity among the Makers for all good reasons, it’s friendly for makers and for everyone that starts in electronics or for anyone who wants to make a fast and easy prototyping project.
We share a common value on how working with electronics should be, and we are happy to support the Arduino users that choose to work also with SOLO in a multitude of ways.
Implement Your Own Algorithms
It is possible to make ARDUINO and SOLO working together in a very simple way by using Analogue voltages or PWM pulses to control the basic tasks.
It’s possible to read within our Blog the simplicity and how SOLO works in Analogue Control, using Potentiometers or using other input sources.
Using our Digital Protocol we are able to comunicate to every Board able to handle it. Over this communication layer we build a simplified solution for ARDUINO Users called SOLO Motor Controllers ARDUINO Library that it work with UART protocol.
When you need more sophisticated control with ARDUINO then Analogue Control, you can use our SOLO Motor Controllers ARDUINO Library, to implement your own ARDUINO Projects using vastly available functions that are offered by SOLO in the most easy and practical way.
SOLO Motor Controllers ARDUINO Library
Speed up your development process in 3 steps, using our Library and stay focused on your projects, the thing that really matters!
2- Connect Solo and Arduino
3- Write A few lines of codes using our library.
Library Explanations and Tutorials
How to Download and Install SOLO Arduino Library
Line connection SOLO UNO
Line connection SOLO BETA
Example: Get Temperature
Example: Get BusVoltage
Example: Set and Get Number of Poles
Tutorial: Sensorless Speed Control of a Brushless Motor
Tutorial: Drone/RC Car Brushless Motors in Sensorless Mode Up to 30,000 RPM
Tutorial: Position Control of a Brushless Motor
Tutorial: Speed and Torque Control of a Brushless Motor with Hall sensors
ARDUINO and SOLO Articles
Speed and Torque Control of a Brushless Motor with Hall sensors using Arduino and SOLO [+ Arduino Code]
In this article we are going to talk about how to control Torque and then Speed of a Brushless motor of any kind from BLDC, PMSM or Coreless EC brushless motors using Hall sensors as their rotor position feedback precisely and efficiently, we are also going to use a...
In this article we are going to control the position of a Brushless DC or Permanent Magnet Synchronous Motor using SOLO with Arduino and more specifically using SOLO’s Arduino Library , in another word, we are turning SOLO into a precise servo drive to interface and...
How to Drive Fast Drone or RC car Brushless Motors using ARDUINO and SOLO in Sensorless Mode up to 30,000 RPM
In this article, we are going to demonstrate how you can use SOLO’s ARDUINO Library to control the speed of a BLDC motor with 4150KV which will reach up to 30000RPM by applying 10V as the Battery or BUS voltage. In this example Closed-loop sensorless control will be...