Finally the Firmware V005 update is out there, it’s mainly focused on performance enhancements for various functionalities.

By updating to V005, your SOLO will get:

– Considerable Performance Enhancement for all types of Motors.

– Full Torque start-up for brush-less Motors in sensor-less Mode.

– Selectable baud-rate of 937500 or 115200 bits/s for UART line.

– Speed controlling up to 30 000 RPM (mechanical) for extremely low inductance motors.

– Hall sensor inputs activated.

– Better performance during Monitoring Mode with higher resolution and samplings.

– So many other minor improvements.

Enjoy.