SOLOPY v4.1.0: New Python Library Release
SoloPy v4.1.0 adds CANopen and CANable support on Windows, Linux and Raspberry Pi, PDO capabilities on all platforms and new examples organized by platform.
Category
News
27 articles
SOLO Arduino Library v5.5.0: Now Supporting Arduino H7
SOLO Arduino library v5.5.0 adds support for the Arduino H7 platform, improving compatibility so developers can integrate SOLO controllers with H7 boards.
Firmware Release: 0000B020 Brings Enhanced Functionality!
Firmware 0000B020 is a free upgrade for all SOLO motor controllers: two new sensorless algorithms, regeneration current limit, PT1000 reading and digital I/O.
SOLO Arduino Library V5.2.0 Released
SOLO Arduino library v5.2.0 supports Arduino UNO R4 WiFi and Minima, adds PT1000 and digital I/O commands, supercharges CANopen and reduces the library size.
SOLO Arduino Library V5.0.0 Released
SOLO Arduino library v5.0.0 adds CANopen PDO support with new PDO examples, improves UART communication and refines the code style for a friendlier experience.
![Our Latest 6kW Motor Controller is Coming [8-60V/120A]!](/media/blog/solo-mega-release/IMG_6862-scaled-960w.webp)
Our Latest 6kW Motor Controller is Coming [8-60V/120A]!
SOLO MEGA, our 6kW controller for DC, BLDC and PMSM motors, launched in June 2023: 8-60V input, 120A DC, isolated dual-channel STO and isolated CAN, USB, UART.
SOLO Motion Profile Engine is released!
A major update in our Motor controllers firmware is released, offering state of art Motion Profile Generation for Position and Speed...
Motion Terminal V2 is Out!
Motion Terminal V2 brings a fresh design, a Configure, Tune and Drive main section, real-time pop-ups, command guides and an improved monitoring mode.
SOLO C++ Library New Release – KVASER Support
The latest version is released. The new version give the possibility of using the CANopen protocol using KVASER products...
Simulink Library News
SOLO is about to release a Simulink library supporting all SOLO functions over USB and UART, with drag-and-drop read and write blocks and CANopen support next.
New update: SOLO Arduino Library v3
SOLO Arduino library v3 adds CANopen for Arduino, working with MCP2515/MCP2551 CAN shields and fully merged with the UART library under the same interface.
CANopen Library for Arduino Is Coming Soon!
A new SOLO library lets Arduino talk to SOLO over CAN bus with CANopen, covering the full object dictionary on MCP2515/MCP2551-based CAN shields.
